|
OpenStack Queens : Configure Neutron#4 (Network Node)
2018/03/07 |
|
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here,
but Configure the 3 Nodes environment like follows.
Neutron needs a plugin software, it's possible to choose it from some softwares. This example chooses ML2 plugin.
( it uses Open vSwitch under the backend )
------------+---------------------------+---------------------------+------------
| | |
eth0|10.0.0.30 eth0|10.0.0.50 eth0|10.0.0.51
+-----------+-----------+ +-----------+-----------+ +-----------+-----------+
| [ Control Node ] | | [ Network Node ] | | [ Compute Node ] |
| | | | | |
| MariaDB RabbitMQ | | Open vSwitch | | Libvirt |
| Memcached httpd | | L2 Agent | | Nova Compute |
| Keystone Glance | | L3 Agent | | Open vSwitch |
| Nova API | | Metadata Agent | | L2 Agent |
| Neutron Server | | | | |
| Metadata Agent | | | | |
+-----------------------+ +-----------------------+ +-----------------------+
|
| [1] | Install Neutron services on Network Node. |
|
[root@network ~]# yum --enablerepo=centos-openstack-queens,epel -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-openvswitch
|
| [2] | Configure as a Network node. |
|
[root@network ~]# mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org
[root@network ~]#
vi /etc/neutron/neutron.conf # create new [DEFAULT] core_plugin = ml2 service_plugins = router auth_strategy = keystone state_path = /var/lib/neutron allow_overlapping_ips = True # RabbitMQ connection info transport_url = rabbit://openstack:password@10.0.0.30 # Keystone auth info [keystone_authtoken] www_authenticate_uri = http://10.0.0.30:5000 auth_url = http://10.0.0.30:5000 memcached_servers = 10.0.0.30:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = servicepassword [oslo_concurrency] lock_path = $state_path/lock chmod 640 /etc/neutron/neutron.conf [root@network ~]# chgrp neutron /etc/neutron/neutron.conf
[root@network ~]#
vi /etc/neutron/l3_agent.ini # line 17: add
interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
[root@network ~]#
vi /etc/neutron/dhcp_agent.ini # line 17: add
interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver
# line 28: uncomment dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq # line 37: uncomment and change enable_isolated_metadata = true
[root@network ~]#
vi /etc/neutron/metadata_agent.ini # line 22: uncomment and specify Nova API server nova_metadata_host = 10.0.0.30
# line 34: uncomment and specify any secret key you like metadata_proxy_shared_secret = metadata_secret
# line 260: uncomment and specify Memcache server memcache_servers = 10.0.0.30:11211
[root@network ~]#
vi /etc/neutron/plugins/ml2/ml2_conf.ini # line 129: add ( it's OK with no value for "tenant_network_types" (set later if need) ) [ml2]
type_drivers = flat,vlan,gre,vxlan
tenant_network_types = mechanism_drivers = openvswitch,l2population extension_drivers = port_security # line 262: uncomment and add enable_security_group = True firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
# end line: uncomment enable_ipset = True |
| [3] | If SELinux is enabled, change policy like follows. |
|
[root@network ~]# setsebool -P neutron_can_network on [root@network ~]# setsebool -P haproxy_connect_any on [root@network ~]# setsebool -P daemons_enable_cluster_mode on [root@network ~]# yum --enablerepo=centos-openstack-queens -y install openstack-selinux |
| [4] | Start Neutron services. |
|
[root@network ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini [root@network ~]# systemctl start openvswitch [root@network ~]# systemctl enable openvswitch [root@network ~]# ovs-vsctl add-br br-int [root@network ~]# for service in dhcp-agent l3-agent metadata-agent openvswitch-agent; do systemctl start neutron-$service systemctl enable neutron-$service done |